Evaporative Air Cooling

Evaporative Air Cooling System

Working Procedure

Cooling principle
Evaporative Air Cooling Unit is applicable for the open and half open environment. It can directly convey natural air and cool air after reducing temperature. Outside fresh air can be conveyed largely after being filtrated and cooled down by the Evaporative Air Cooling Unit, and the inside odor & dusty air will be taken from the room. This Evaporative air Cooling unit can give attention to ventilation, temperature-descent and increasing the content of in the air.

Temperature Dropping Principle
Evaporative Air Cooling Unit drops temperature through absorbing the heat in the air with water evaporation according to the principle of “water absorbs heat after evaporating, and the evaporative area affects the evaporating”. When the hot air passes through the cooling pad whose actual heat exchange area is 100 times of the surface area, the heat of the air will be absorbed, thus dropping the air temperature.

Evaporative Air Cooling System
Evaporative Air Cooling System
Standard Parameter of Evaporative Air Cooling Unit

Technical ParametersUnitModel 18AModel 30A
Air Flow RateM3/Hr18,00030,000
Power Supply/Frequency(V/Hz)3 phase 220/50, 380/503 phase 220/50, 380/50
Power Consumption(KW)1.13.0
StyleFlowAxis-flowAxis-flow
Water Consumption(L/H)4025-30L
Water Tank Capacity(L)2560L
SizeL X W X H(mm)1100X1100X10001470X1470X1360
Weight(Kg)65115KG
Airflow outlet size(mm)L X H (mm)\Ø670X670900X900
Noisedb (A)≤78≤78
Effective AreaM2100-150200-250
Works Electric Current(A)2.75.6
Why Evaporative Air Cooling Unit?

Evaporative Cooling System is the best solution for industrial floor cooling compare to Air Conditioning System because

This reduces floor Temp. 5-7°C from ambient temperature
Saves electricity so less running cost (only 1.1 kw/machine)
Not requires the ceiling fan, saves huge electricity and running cost
Circulates always fresh & cold air so increase workers efficiency
Save environment as no CFC emission
Evaporative Air Cooling – Recently Completed projects

S./N.Name of the Project.Floor SizeQuantity of m/c
1EPIC GARMENTS (EGMCL), Unit-4 Adamjee EPZ, Narayangonj2,00,000 SFT (1,00,000 x 2 floor) Ground Floor-1,00,000 SFT (by Internal Ducting) 1st Floor-1,00,000 SFT (Roof Top installation171 Units, 30000 m^3/hr-40 unit, 18000 m^3/hr-131 unit Note: This is the biggest Evaporative Cooling project in Bangladesh
2Shore to Shore Textiles Ltd. Adamjee EPZ, Narayangonj1,20,000 SFT (80 m ⁄ c on Roof Top installation and 20 m ⁄ c at sidewall by internal ducting)2 Shore to Shore Textiles Ltd. Adamjee EPZ, Narayangonj 1,20,000 SFT (80 m⁄c on Roof Top installation and 20 m⁄c at sidewall by internal ducting) 100 units (18000 m3/hr capacity)
3SQ Birichina ltd. Valuka, MymenshinghTotal Floor size 30,000 SFT (by Internal Ducting)21 units (30000 m^3/hr capacity)